Sunday 19 May 2013

Hoan Bridge bike lane options priced from $9.4 million to $95.5 million

cycling, Hoan Bridge

Adding a lane for bikes and pedestrians on the Hoan Bridge would cost $9.4 million to $95.5 million, according an analysis of alternatives done by the consulting firm Graef USA.

The range of costs represents the choice to be made - money or traffic lanes - if the Wisconsin Department of Transportation decides to include the bike lane in its upcoming reconstruction.

That project, replacing the road atop the bridge, will start in 2013 and is expected to cost $275 million to $350 million.

With the engineering work under way, the DOT sought to analyze the costs and feasibility of adding a lane for bicyclists and pedestrians.

A draft of the study, which cost $99,000, was released Thursday. It puts a price tag on an addition to the Milwaukee biking options long sought by cyclists.

Closing off one of the northbound lanes on the Hoan, and using the eastern-most section of road for a two-way bike and walking path, would cost $9.4 million. That would reduce the number of northbound traffic lanes from three to two.

 

As the sketch shows, the bike and pedestrian lane would be separated from motor vehicle traffic by a concrete barrier topped with fencing. The bike lane would be 14 feet wide. The two traffic lanes would be 12 feet each. The inner median would be four feet wide, and the outer, eight feet.

Putting the bike lane in the center of the bridge would also eliminate a northbound traffic lane and cost $27.5 million.

Based on the Graef report projections of traffic volume in 2035, losing one of the six lanes for motor vehicles would result in slow-moving traffic in the future.

The engineering firm also looked at widening the bridge on the east side and tying a bike path to the main supports. That would cost $76.4 million, but preserve the six, 12-foot wide traffic lanes that now carry about 40,000 vehicles per day.

Other options laid out in the report are a bike path built above the current roadway, for $95.5 million or a whole separate structure for $84.4 million. That option is shown below.

The report does not identify which of the alternatives, if any, is favored.

"The governor is evaluating the estimates and looks forward to assessing any additional feedback the department receives from future public hearings," said Cullen Werwie, spokesman for Gov. Scott Walker.

In his posting for the Bicycle Federation of Wisconsin, Dave Schlabowske explains how requirements tied to the use of federal dollars in the bridge reconstruction may impact the decision.

"The Federal Highway Administration directed WisDOT to do the study because since 2001 federal policy has required bicycle accomodations on projects that use federal funds unless there is an absence of need or the cost is excessive, which is typically defined as exceeding 20% of the total project," Schlabowske wrote. "In this case, the estimates place the cost of rehabilitating the Hoan Bridge between $275 million and $350 million."

The low end of the cost estimates falls easily within that 20%; the high end exceeds it.

Kevin Hardman, executive director of the Bicycle Federation had this to say about the report:

"“It is very exciting to finally get the study, and we look forward to working with the staff at the WisDOT and the Governor’s office to try to capitalize on a once in a generation opportunity to fill this gap in what is probably the most valuable trail system in Wisconsin.

"The 160-mile network of trails from Chicago to Sheboygan along the Wisconsin coast of Lake Michigan is a tremendous asset for our state. The Bike Fed is confident that the engineers at our Department of Transportation and our political leaders recognize the value in improving that trail system and will balance the costs with the benefits in a responsible manner.”

The state is holding a public hearing on the report on Nov. 14, from 5 p.m to 7 in the DOT’s Milwaukee office, 1001 W. St. Paul Ave.

Comments on the report may be directed to Carolynn Gellings, P.E. Project Manager, Wisconsin Department of Transportation, Southeast Region, 141 NW Barstow St., P.O. Box 798, Waukesha, WI 53187-0798. Email comments to carolynn.gellings@dot.wi.gov are also welcome.

61 Comments for "Hoan Bridge bike lane options priced from $9.4 million to $95.5 million"

  1. Okay, I have been one of the biggest proponents of this bike lane, but I was hearing cost estimates of 2 or 3 million. Now the cheapest option is 9 million and the most expensive is 95 million. As someone who sees this as being an awesome thing for Milwaukee, I certainly could not get behind it at any of these prices.

    MU82 Oct 27, 2011 7:19 PM

  2. I read through the report and I do have a question.

    When I reviewed the detailed cost breakdown it appears that roughly 2/3 of the cost of Option 1A (the $9.4MM option)is the rehabilitation of the roadbed and the underlying structural steel along with the rehabilitation of the existing perimeter guards.

    Wouldn't this work need to be done regardless of whether or not there is a bike/pedestrian lane? Allocating these costs to the bike lane portion appears to be misleading as this work is required no mater what.

    When you add up the costs that appear to be unique to the bike/pedestrian lane for option 1A it totals roughly $3MM.

    I am not certain that my interpretation is correct. But if we are about to embark on what is likely to be a "spirited discussion" here I think this is an important distinction to make.

    Can someone clarify if my understanding is correct?

    BDWIRunner Oct 27, 2011 8:22 PM

  3. BDWIRunner, that's a good question on how much of the cost is part of the larger project, and I'll follow up. That also will be something to ask at the public hearing next month.

    T. Held Oct 27, 2011 10:02 PM

  4. Talk about a waste of money. We can waste $9.4 million, or $95.5 million.

    Galactically stupid.

    Izzatso Oct 28, 2011 7:51 AM

  5. Is it so hard for the bicyclists to go down KK Ave to reach downtown and the lakefront? That street already has a bike lane.

    I know the view is great, but why would you want to tolerate the high winds (or the smell)?

    viper3579 Oct 28, 2011 8:27 AM

  6. Somehow or other semi-trucks and motor-homes continue to drive over the high-level bridge in high winds without being blown off the bridge. Perhaps they are a little more careful in those conditions, just as a cyclist would be careful in windy conditions. I've ridden in 40 mph cross-winds. Sure, I was tipped over into the wind but it can be done, and I'm still alive to talk about it. This happened when I was a full-time bike commuter and had to get home.

    BikerRon70 Oct 28, 2011 11:15 AM

  7. As a bike rider, it is no problem going from the South side to the East side using the existing city streets. The cry for adding a bike lane to the Hoan Bridge just shows how selfish these people are. We have bigger issues in this state! Put this money to the bus system so people who do not have transportation can get to jobs, etc. $9,000,000 IS TOO MUCH FOR A BRIDGE THAT WONT BE USED FROM NOV - FEB and will get very little use the rest of the year!

    telling it like it is! Oct 28, 2011 11:51 AM

  8. The $9.4 million option is a non-starter. Currently, there are 3 lanes on both sides of the bridge and traffic is still very slow at many times. The elimination of a lane from the bridge would create a traffic nightmare.

    This leaves the option of adding an additional bike lane. This would increase the cost by nearly $100 million. Does anyone honestly think that there will be enough people using the bike lane to warrant that additional cost?

    To put the cost in perspective, this is $160 per resident of the City of Milwaukee.

    MuskieGo Oct 28, 2011 12:54 PM

  9. You may be a bike rider, but my guess is that you haven't tried making this drive yourself. I have done it countless times and it is nerve-wracking.

    Bob81 Oct 28, 2011 4:58 PM

Post a Comment

Limit of 2000 characters,  characters remaining

Preview

Discussion guidelines | Privacy policy | Terms of use

Please login to post a comment.

Page Tools

Latest Posts

Archives